If you are mining Dynex (DNX) with the SRBMiner-MULTI v2.3.7 miner especially if dual mining DNX and ZIL you should upgrade to the just released version 2.3.8 as it implements important fixes regarding Dynex mining. It is a mandatory upgrade for Dynex miners as apparently the latest performance optimizations in version 2.3.7 have apparently resulted in returning some invalid pouw solutions and while the new version resolves the problem it also brings down the hashrate a bit as a result according to the miner’s developer. The update to SRBMiner-MULTI v2.3.8 is mandatory as older versions will stop working in a few days and you need to update if you want to continue to be able to mine DNX!
According to Doktor83, the developer of the mining software, NVIDIA GPU’s got the biggest hit in term of hashrate and mining performance should decrease on most of the supported GPU’s, except on AMD RDNA2 GPUs which supposedly got an increase in hashrate from the new code. Our own initial observations do show that for example RTX 3070 performance goes down by about 5%, but RTX 3080’s performance actually goes slightly up with about 2% and RTX 3090 goes down by about 1%. So, while it is mandatory to upgrade if you are using the miner to mine Dynex, depending on your GPU type you might get mixed results in terms of the change in hashrate after the upgrade.
– To download the latest SRBMiner-Multi 2.3.8 With Support for DNX and ZIL Dual-Mining…